XR104 Alumina support Chloride adsorbent

  • activated alumina
  • activated alumina

XR104 alumina support chloride adsorbent is an adsorbent used to adsorb and remove chloride from Naphtha, natural gas, H2, N2, NH3, CO, CO2 & other feed gas in petrochemical. It is good effeient to remove chloride

Product Information:
In petrochemical production process, chlorine in feed gas could cause poisoning of a variety of catalyst and adsorbent, the failure of adsorbent & catalyst performance, severely corrosivity of devices & equipment, so chlorine removal is necessary. Usually, we adopt solid antichlor to remove chloride in feed gas.  XR-104 alumina support chloride adsorbent is an high- efficient product to take off chlorine.
There are series types-Pellets(XR104B) and beads(XR104A)
lVarious size available for the international condition.
1/8” (3.2mm), 3/16”(4.7mm)
Characteristics of alumina support chloride adsorbent:
lUniform size
lEven and Uniform activity under high and low temperature
lGood water resistance and strong strength
lUneasy movable active components & chlorine after reaction
lWide application area
Working service  of Activated alumina for removal of chloride:
Working temperature:5-400℃
Working pressure: ordinary pressure- 0.8MPA
Space velocity: 1000-3000h-1
Bed height-diameter ratio: >3
Dechlorination ratio: ≥99.9%

Item

Unit

Technical requirement for XR104A

Appearance

White bead

Particle   size

mm

3-5mm, 2-4mm

AL2O3+promotor

%

≥93

Bulk   density

g/cm³

0.75-0.8

Surface   area

㎡/g

≥130

Pore   Volume

ml/g

≥0.4

Penetration of chlorine capacity(50℃)

%

≥12

Penetration of chlorine capacity(250℃)

%

≥22

Crushing   Strength (N/Particle)

N/particle

≥85

Application  of alumina based chloride adsorbent
XR-104 activated alumina ball for dechlorination is widely used for HCL removal(dehydrochlorinate) in syngas, catalyst & adsorbent protection, and dechlorination from Naphtha, natural gas, H2, N2, NH3, CO, CO2 & other feed gas.
Storage  of Activated alumina for removal of chloride:
lAvoid moisture, avoid scrolling, throw and sharp shocking during transportation, rainproof facilities should be readied..
lIt should be stored in dry and ventilated warehouse to prevent contamination or moisture.
Package  of Activated alumina for removal of chloride:

Type

Plastic bag

Drum

Drum

Super sack/Jumbo bag

Bead

25kg/55lb

25 kg/ 55 lb

150 kg/ 330 lb

750kg/1650lb

900kg/1980lb

1000kg/ 2200 lb

 

Download-XR104A chloride adsorbent

 

If you would like a quotation or further information on this product, please fill in the form below and we will reply to you within 1 working day.

Country

Your Name

Your Email

Your Telephone

Subject

Your Message

captcha

activated alumina for removal of chloride

 

Country

Your Name

Your Email

Your Telephone

Subject

Your Message

captcha

Leave a Reply

Your email address will not be published. Required fields are marked *

','

'); } ?>